Precautions for use

1. The technical indicators of this series of products are tested by actual operation before leaving the factory. If the user needs to use the self-prepared thermometer (the thermometer with certain accuracy) for the process requirements, the user's thermometer can be used.

2. Regularly check whether the screws of each electrical contact are loose. If it is loose, it should be tightened to keep the contact of each electrical contact good.

3. This equipment is non-explosion-proof equipment. It is not allowed to carry out experiments and storage of inflammable and explosive materials to avoid the risk of deflagration.

4. When using the electric heating blast drying oven, special personnel must be taken care to ensure the normal operation of the equipment.

5. When the electric heating constant temperature blast drying box is not used for a long time, the items in the working room should be taken out and wiped clean to keep the equipment dry.

6. The abnormal phenomenon of electric heating blast drying oven should be checked and repaired in time. If the fault cannot be accurately judged, it can be related to the technical department of the company.

Maintenance and maintenance

1. Before using, you must pay attention to whether the power supply voltage used is consistent. When using, the power outlet ground wire must be grounded as specified.

2. When using the power, do not touch the electrical parts of the space on the left side of the box with your hands or use a damp cloth and rinse with water. The power should be cut off during maintenance.

3. The power cord should not be wrapped around metal objects. It should not be placed in a place with high temperature or humidity to prevent the rubber from aging and causing leakage.

4, the contents of the box should not be over-squeezed, you must leave room for natural convection of air, so that humid air can accelerate on the wind top.

5. Regularly check whether the silver contact of the temperature regulator is hairy or uneven. If it is, use the fine gauze to level the contact, then use it, and always wipe it with a cleaning cloth to make it in good contact (be careful to cut off) power supply). Do not hit the metal pipe of the indoor temperature regulator to avoid affecting the sensitivity.

6. Do not put flammable materials in the dry box without explosion-proof device.

7. After each use, the power supply must be cut off, and the inside and outside of the box should be kept clean. Hang the corresponding logo after cleaning. More from Kunshan Haida Instruments

8. Explosive, flammable and volatile materials should not be placed in the dry box to avoid explosion.

9. Items cannot be placed on the shelf between the sample chamber and the heating chamber to avoid affecting heat exchange.

10. Be sure to check the presence or absence of overlap or short circuit of the nickel wire before use.

Shangyu Xingxing Instrument Equipment Co., Ltd. is located in Daoxu Town, Shangyu District, Shaoxing City, Zhejiang Province. It is an enterprise integrating production, product research and development, processing and trade. The company's main products: drying box series, incubator series, laboratory muffle furnace series, distilled water series, as well as clean workbench, air shower, fume hood, biological safety cabinet and other complete purification equipment.

The company has a strong technical research and development team, a strong after-sales guarantee service system, is the linger of the Chinese laboratory complete sets of equipment manufacturers, welcome customers to buy.

Solas Reflective Tape

Solas Reflective Tape

1) Material of our Solas Reflective Tape :

Our Marine reflective tape for Safety is based on premium polyester material, SOLAS (Safety of Life at Sea) Grade. The surface is equipped with a highly visible honeycomb pattern , with alternating ultra bright silver color, it ensure the reflective safety tape reflect light better in the dark, with smooth and glossy surface that reflects light in any situation added visibility.the high reflective tape gives you extra security.

2) Certificate of our Solas Reflective Tape :

It is a SOLAS (life safety at sea) certification, please note that there is a SOLAS mark every 4cm on the tape.

3) High luminance

our specially made glass microbead tape is manufactured by professional technology. High visibility ensures safety tape reflects light better in the dark, which will greatly increase visibility during the day and at night. Its unique design of glass microbead pattern gives off bright light when reflecting light. Improve visibility, believe he's right, improve SAFETY and reduce the chance and risk of an accident.

4) Features : Industrial adhesive, easy to apply. PET tape has a strong adhesive force, and a certain degree of flexibility, to resist peeling and tearing, strong adhesion. Stickiness can even outlast life. Our reflective safety sign tape is tough, durable, and able to withstand elements for great indoor or outdoor use, and in continuous efforts for safe human travel...

5) Sizes: We have made this reflective tape into different sizes to facilitate your specific needs. Including heat and humidity.

6) Applications: Reflective tape application is very wide, there are many kinds of application such as car parks, warehouses, storage unit, office, classroom, hospital,, garage, roads, factories, machinery, restaurant, goods, garage doors, truck, boat, mailboxes, helmets, different types of trailer, truck, mailbox, bicycle, car, rv, backpacks, railing, ramp, trailers, drivers, hiking, biking and jogging in the daily use, the danger zone. Our tape has infinite possibilities.

Solas Reflective Tape,solas grade reflective tape, Marine Reflective Tape,High Intensity Reflective Tape

Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytapes.com