First, the high-speed automatic cartoning machine tray can not be successfully sucked 1. The vacuum pipeline is blocked or leaked: carefully check the air circuit and eliminate the fault.
2. Suction cup aging in the suction box mechanism: replacing the suction cup
3. Damage to the inner seal of the rotating head: replacement of new parts
4, the suction box mechanism sucker action is not correct: according to the position and time of the carton conveyor chain readjust
5, the packaging carton stick together: replace the carton
Second, the high-speed automatic cartoning machine manual can not be sucked down
1. The suction nozzle does not touch the instruction manual: adjust the position and angle of the suction nozzle and the paper tray according to the adjustment method.
2. There is no vacuum generated when the suction nozzle contacts the instruction manual: re-adjust the description of the vacuum generation time in combination with the adjustment method.
3. Insufficient suction of the suction nozzle: check the vacuum line of the equipment to eliminate the blockage
4. The paper separation mechanism is not working correctly: re-adjust according to the adjustment instructions.
5, the blowing mechanism action and time is not correct: according to the adjustment instructions to re-adjust
6. The adjustment of the transmission system of the manual is incorrect: re-adjust according to the adjustment instructions.
Third, the high-speed automatic cartoning machine suction nozzle sucks a number of instructions
1. The angle of the paper tray is not suitable: readjust the paper tray and the suction nozzle
2. The following manual of zui is not separated: re-adjust the action matching of the separation hook and the suction nozzle
Fourth, the manual is left inside the origami mechanism
1. The paper roll breaks the manual and is stuck in the origami mechanism: adjust the matching between the paper roll and the paper hook, suction and air blowing.
2. The gap of the folding roller in the folding mechanism is not suitable: re-adjust the gap between the folding rollers
Fifth, the instructions are taken out from the machine
1. No inserted origami tray: insert origami tray as required
2. The origami tray is not in place: insert the origami tray into place.
Six, the folded instructions do not meet the requirements
1. The form of the origami tray is incorrect: insert the origami tray that meets the requirements.
2. The position of the origami tray is incorrect: insert the origami tray according to the folding method.
3. The size of the origami plate is not adjusted correctly: adjust the position of the bar according to the adjustment method.
Seven, the folded manual is not in the right position
1. The manual in the origami tray is not placed correctly: adjust the position of the lever and arrange the manual
2, the specification of the conveyor system deviation: adjust the conveyor belt to keep it tight and consistent, no deflection or turbulence during operation
Black and White Ultrasound Scanner
"Black and White Ultrasound Scanner" is to emit ultrasonic waves, so that the ultrasonic waves encounter barriers to generate echoes, use the computer to collect these echoes, convert them into corresponding images and display them on the screen, and the images measured by the ultrasonic probe are black and white, so it is called " Black and White Ultrasound Scanner" is also the earliest diagnostic technology adopted by b-ultrasound.
"Black and White Ultrasound Scanner" has the advantages of non-invasive, high sensitivity, low cost and convenient operation
Black And White Ultrasound Scanner,Animal Ultrasound Scanner,Palm Veterinary Ultrasound Machine,Animal Veterinary Ultrasound Machine
Mianyang United Ultrasound Electronics Co., Ltd , https://www.uniultrasonic.com