The correct five tips for using an explosion-proof platform:

1. The explosion-proof floor scale meter is equipped with a battery. Do not plug the power cord into the power cord socket at all times. This will reduce the battery life. Only when there is a low voltage indication on the meter display, the charging time is 8-10. Hours (requires continuous charging).

2. In the process of using the pit-type electronic small scale, the weighing platform of the electronic scale should be placed at the center of the foundation pit so as to avoid the edge touching the surrounding cement surface, so that the weighing is inaccurate and the foundation pit should be kept. Clean, do not have garbage and items falling in, this will make the weighing platform stuck or the weighing result is less than the actual weight.

3. When weighing the cargo, place the cargo as much as possible in the middle of the weighing platform and keep it stable.

4. Every time you push the cart onto the weighing platform or use the forklift to place the goods carefully, do not shift the weighing platform, which will cause errors.

5. Each plug on the meter should be inserted firmly. The forbidden screw on the plug should be locked. When the meter power switch is turned on, it is forbidden to dial the signal line and the printer plug.

Sixth, the explosion-proof platform should be placed horizontally. The four corners of the weighing platform should touch the ground at the same time. Do not have the hanging phenomenon. When checking, you can use the hand to shake the four corners up and down to see if the bottom corner is against the ground. If it is suspended, adjust the foot. The screws balance it.

7. Before using the explosion-proof floor scale, check whether the wiring is loose and cut, and the grounding wire is secure.

8. There shall be no foreign objects such as stones and coal blocks in the gap around the explosion-proof scale platform. The weighing platform and the surrounding limit bolts shall not collide and rub. The performance of each supporting component is good. The overload protection device of the weighing platform should be adjusted frequently at the specified position. .