How to properly lay the fermentation bed
The traditional way of raising pigs is to use cement floors, which must waste water and manpower by flushing pig manure, while dry-sweeping fermentation beds can avoid this situation and save labor costs. In many areas, gold Baby dry-type fermentation bed has been promoted, but what about dry-sweeping fermentation beds? Here's a detailed introduction. Due to the fact that microorganisms fully decompose and ferment fecal matter at the bottom of the fermentation bed, the entire house is free of odors, and the feces is transformed into microbial prey through the use of beneficial microorganisms, which in turn becomes a microbial protein that can be used by pigs. The problem of modern pig manure disposal has been solved. The main steps in the dry-sweeping fermentation beds are: One is to choose litter, fermentation mattress material in fact choose a wide range, you can use straw, straw, sawdust, corn cob, branches, leaves, rice husks and many other materials, but in the actual use of effects and long performance, generally Sawdust is preferred, followed by rice husks, straw, leaves, corn cobs, etc. Because sawdust has better adsorption, breathability, and carbon content than other materials. Instead, select the strains: According to the principle of dry-fermentation fermentation, the strains need to use suitable carbon sources and nitrogen sources to ferment the bed, and the feces provide nitrogen source, while the litter provides the carbon source, so the fermentation mattress material The role is to provide carbon sources and "hotels" that provide microbial activities. The next step is to set up a dry-sweet fermentation bed. There are six steps in the dry-sweeping fermentation bed. 1. Buy sawdust and dry the sawdust and dry as much as possible. 2, buy bacteria, prepare corn flour or bran rice bran and so on. 3. Mix 1 part of the dry-sweeping fermentation bed strain with 5 parts of corn flour or bran before making the fermentation bed. And divided into 5 copies. 4. Spread the sun-dried sawdust into the pens for 10 centimeters, sprinkle a strain of bacteria, then spread a sawdust of ten centimeters and then spread a strain of bacteria to know the height required for laying on the fermentation bed. Or spread all the sawdust to the pen, spread all the bacteria evenly onto the surface, and turn it over evenly. 5. After the dust falls, spray a small amount of moisture on the surface of the fermentation bed to prevent the animals from running and raising dust. 6, the cultured animals will be quickly shed to begin breeding. Fermentation bed farming has been recognized by more and more farmers, but many people are worried about not doing, how to do it. In fact, fermentation bed production is very simple, the fermentation bed consists of two parts, in the production of dry fermentation bed It is necessary to strictly follow the steps of the production and produce a qualified dry spreader. Security Camera Surveillance camera is a semiconductor imaging device, which has the advantages of high sensitivity, strong light resistance, small distortion, small size, long life, and anti-vibration. Surveillance cameras in security systems.
Image generation is currently mainly from CCD cameras, and the stored charge can also be taken out to change the voltage. It has the characteristics of anti-vibration and impact and is widely used.
Security Camera Surveillance camera is a semiconductor imaging device, which has the advantages of high sensitivity, strong light resistance, small distortion, small size, long life, and anti-vibration. Surveillance cameras in security systems.
Security Camera Surveillance camera is a semiconductor imaging device, which has the advantages of high sensitivity, strong light resistance, small distortion, small size, long life, and anti-vibration. Surveillance cameras in security systems. Security Camera,CCTV Camera,Solar Security Camera ,4G Security Camera Shenzhen Fuvision Electronics Co., Ltd. , https://www.outdoorsolarcameras.com
Image generation is currently mainly from CCD cameras, and the stored charge can also be taken out to change the voltage. It has the characteristics of anti-vibration and impact and is widely used.
Image generation is currently mainly from CCD cameras, and the stored charge can also be taken out to change the voltage. It has the characteristics of anti-vibration and impact and is widely used.