How should the checkweigher be cleaned?
The cleaning of the checkweigher is mainly divided into the following steps: 1. Cleaning steps of the automatic checkweighing scale â— Cut off the power of the automatic checkweigher â— Unplug the power cord â— Soak the gauze and wring it out â— Then take a little neutral detergent ( such as alcohol ) â— Clean the weighing pan, display filter and other parts of the scale. 2, horizontal correction 3. The cleaning procedure of the printer ( under the premise that the device is equipped with a printer ) â— cut off the power â— Open the plastic door on the right side of the scale body â— Hold the plum handle on the outside of the printer â— Pull out the printer â— Press the spring part of the front of the printer â— release the print head â— Gently wipe the print head with the dedicated print head cleaning pen â— After cleaning and wiping, cover the cap to prevent the cleaning liquid in the pen from evaporating. â— Then wait for two minutes, after the cleaning liquid on the print head is fully evaporated, then close the print head. â— Push the printer back into the scale body â— Close the plastic door â— Power-on detection, normal printing can be used after printing. 4, initialization The checkweigher has zero tracking and power-on zeroing. After booting, clear the foreign objects on the automatic checkweigher to ensure that the automatic checkweigher is not used for ventilation. If there is a little weight display after booting, you can press the " clear " button on the keyboard to restore the scale to zero. Bit. Facial Cleanser,Cerave Face Wash,Face Wash For Oily Skin,Acne Face Wash Guangzhou Lingxue Cosmetics Co., Ltd , https://www.lxgj188.com
After cleaning, check whether the scale of the automatic checkweigher is normal. If it is tilted, adjust the scale to make the weighing table in the center position. 
