Principle:
3D HIFU is ultrasound energy distance of width, length and depth, which more Comprehensive, three-dimensional. Directly delivers heat energy to skin and subcutaneous tissue that can stimulate and renew the skin's collagen and thus consequently improving the texture and reducing sagging of the skin.
Layered energy emission transmitter of HIFU
1.Transducer DS-4.5mm, 4MHZ frequency used to transmit high- energy focused ultrasound to the skin, subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm, direct subcutaneous SMAS layer, forming "heat coagulation" regional, targeted to thicker skin, such as cheeks, etc.
2. Transducer DS-3.0mm, 4MHz frequency ,used to release ultrasound energy into the dermis layer of 3.0mm,is responsible for activating the skin's dermal layer of collagen, effectively enhance the effect of the consolidation of the outline, but also improve large pores and reduce the appearance of wrinkles.
3. Transducer DS-6.0mm,8.0mm,10mm,13mm and 16mm are responsible for transmitting 4 MHZ high intensity focused ultrasound subcutaneous fat layer to melt the fat cells. Then the metabolites of fat cells will be excreted by human body's metabolis.It is targeting the body.
Note: DS-6.0mm,8.0mm,10mm,13mm and 16mm transducer is ONLY do for body fat reduction, skin tightening.

HIFU machine photos:




 

DS-6.0mm,8.0mm,10mm,13mm and 16mm transducer is for body fat reduction, skin tightening.

 

Operation step of hifu:

1. Clean the Skin.
2. Take a photo before treatment , and paint on the preoperative lifting location with make up pencil 
3. According to the skin thickness to select appropriated transducer (Transmitter) .
4. Set suitable input intensity ( such as1.0-1.5J ) , focal length and spacing ( such as 1.5mm)
5. Applying ultrasonic plentiful gel as couplant between transducer and skin.
6. Face lifting operate on the note of power line, forming a line thermal condensed node in the specified depth under skin when the transmitting button is pressed per time, operating continued on the powder line until the specified location transmission is completed. The treatment parts such as face, chin and both sides of neck.
7. Don't operate on marginal mandibular nerve and supra or bital nerve.
8. No recovery period after treatment, daub some moisture product and make up immediately.
9. Only once, the comprehensive effect will gradually appear in two or three moths,Some people may do this treatments several times.

 

Our services:

1.Our equipment have 1 full year warranty and lifetime maintenance.

2.OEMandODMservice.

3.We are looking for dealers and distributors in worldwide.
 

Contact info:

Contact person: Ms. Bessy Guo

Tel: 0086-319-8202230 

Mobile:0086-18713988921

 

Fiberglass Mesh

Fiberglass Mesh

Fiberglass mesh is made by soaking and coating with macromolecular alkali-resistant latex on the basis of C-fiberglass and E-fiberglass. The color of fiberglass mesh is white, black, organge, blue, yellow or as per customer's needs. And the fiberglass mesh's package can also as per customer's requirement to finish. The fiberglass mesh be widely used on : wall reinforcement, reinforced cement products, waterproofing favrics, the roof waterproof, enhance the skeleton of plastic and rubber, fire prevention board, highway parements, joint tapes of buildings.

The advantages of fiberglass mesh:

high strongth

good alkali resistance

prevent cracks and deformations

easy to be constructed

more durable

Fiberglass Mesh,Fiberglass Mesh Screen,Woven Fiberglass Mesh,Fiberglass Mesh Tape

ANPING COUNTY SHANGCHEN WIREMESH PRODUCTS CO.,LTD , https://www.scwpwiremesh.com