The trajectory of the linear vibrating screen is straight or close to a straight line; the screen surface is generally horizontally mounted or slightly inclined; the vibration direction angle is 30 to 60 degrees; the material conveying and sieving are performed on the horizontal screen surface.

The linear vibrating screen has compact structure, reasonable vibration parameters, stable movement, convenient maintenance and high screening and dewatering efficiency. They are widely used for material dehydration, de-intermediation, de-mudging, and dry and wet grading. They can also be used as a closed circuit in the grinding circuit to classify fine-grained materials.
Because the environment of different customers is different, the size of the factory is different, which limits the installation position of the vibrating motor of the linear vibrating screen. According to the installation position of the vibrating motor of the linear vibrating screen, it can be divided into: upper vibration type, lower vibration type and side vibration type.

For example, the customer asks the height of the discharge port to be lower than the ground due to special circumstances, and there are certain restrictions. If the vibration motor is placed underneath, the height is increased, which is inconsistent with the customer's requirements. How to solve this problem? What about the problem? The height of the screen box is fixed and cannot be changed at will. Then, in addition to the screen box, the vibrating motor can be modified for the linear vibrating screen. The position of the vibrating motor can be changed, placed side by side from below, and moved to the sides. Side by side arrangement, which not only meets the requirements of customers, but also does not affect the efficiency of the linear vibrating screen at work.

For example, two: width limits, different requirements for different sites. In addition to the fixed width of the equipment model, it is still necessary to leave a certain width for the operation of feeding, etc., but because the width of the factory is certain, after leaving a certain width such as feeding, the rest is the width of the sieve machine. If the linear vibrating screen is too wide, it will not fit. It is necessary to change a sieve machine with a smaller width. Once the width of the linear vibrating screen is narrowed, the processing volume will be relatively small, and then the whole will be affected. production progress. Therefore, without affecting the throughput, the width cannot be reduced, so that only the position of the vibration motor can be started. The two motors are installed side by side at the bottom, which reduces the width of the sieve machine, so that the width length is not Change, the amount of processing will not change.

For example, if there is a restriction on the discharge port and a limited width, the installation position of the linear vibrating screen motor cannot be below, nor on both sides, and only occupy the upper space. In the process of production and manufacturing, it needs to be designed separately, and installed side by side in the upper middle position, so as not to affect the operation of the vibration motor, and is suitable for the requirements of the factory.