Descaler application range and water quality
The descaler generates a high-energy RF electric field that acts on the water system pipeline to resonate the water molecules in the pipeline, changing the hydrogen-bonded water molecules into a single polarity, changing the activation of the water. Tiny water molecules can penetrate, envel, dissolve, and remove the old scale in the system, causing Ca2+, Mg2+, and CO32- in the water to collide with each other to form a soft special aragonite crystal. Since these crystals have no charge on the surface, they are no longer adsorbed. On the pipe wall or on the equipment, the purpose of descaling and anti-scaling is achieved. For systems with high intelligence requirements, the "smart descaler" can be used. The "smart descaler" is based on the general "descaling instrument". The water quality is comprehensively detected. When the water is concentrated and deteriorated, When the standard is exceeded, an audible and visual alarm can be realized. Application range of descaling equipment Tap water, chilled water, cooling water, heating water, bath water, ground water, swimming pool water, industrial water and many other fields, such as anti-scaling, anti-corrosion, anti-corrosion, sterilization and algae elimination. Technical features of descaling instrument Mechatronics design, small size, large flow, pure physical treatment, no pollution to water quality, low operating and management costs, simple operation and convenient maintenance. Descaler adapts to water quality: total hardness ≤700mg/l (CaCO3) Uv Spot Curing Light,Uv Spot Lamp,Uv Spot Curing,Uv Curing Spot Lamp Rolence Enterprise Inc. , https://www.rolencedent.com
Descaler anti-scaling and descaling efficiency ≥95%
Descaler pressure loss: ≤ 0.02MPa
Descaler working power: 190 ~ 250V 50 ~ 60Hz
Descaler safety insulation voltage: 5000V
Descaler working environment requirements: -25 ° C ~ +50 ° C relative humidity ≤ 95%
Descaler working medium temperature: -25 ° C ~ +90 ° C Power consumption: ≤ 340W
Descaler average time between failures: no less than 50,000 hours