4YD-3A corn grain and harvester
Curcumin Powder,Wolfiporia Extensa,Lygodium Conforme Senyuan Biological Technology Co., Ltd. , http://www.hnvitamins.com
December 19 23:04:10, 2018
Beijing Jinle Agricultural Machinery Co., Ltd. is located in Fugezhuang Village, Yujiawu Township, Tongzhou District, Beijing. It is a company specializing in the development and production of corn harvesters and belongs to the branch of science, industry and trade. Due to the large size of our country and the different corn planting patterns in different places, the row spacing is between 20 and 70 centimeters, which makes it difficult to popularize the corn harvesting machine because of the difficulties of harvesting. In 2001, the corn harvester developed by our company first solved the problem of harvesting difficulties, and in the country The first company announced that "the harvest of corn can not be a pleasure" (Agricultural Illustrated reported) and filed a patent. The corn harvester developed by our company can be equipped with a tractor with more than 55 horsepower. The indexes of corn harvest meet or exceed the national standards, overcome the conventional corn harvester, and the corn harvested in the harvested corn is bitten. , grain loss, corn loss and other shortcomings. With straw crushed to return the machine, the fine straw powder, adapt to the next agricultural machinery direct operation. With the development of the aquaculture industry and the needs of the market, our company took the lead in the successful research of the straw crushing recycling machine. The patent application has been authorized. It uses the current market straw crushing and returning machine principle and adds a grass collection device. The collected grass was propelled into the fan by augers, and the grass was thrown on a straw pulling truck by a fan through a weed delivery pipe. The recovery rate was over 95%. After repeated development of the prototype in 2002, the small-scale experiment was improved in 2003. In 2004, mature models were formed and put on the market. They were sold in Xinjiang, Gansu, Inner Mongolia and other provinces and cities. They achieved good results after being used and were praised and praised by agricultural machinery specialists, breeding specialists and growers. Its characteristic is that the corn stalks are crushed by the straw smashing and recycling machine, the straws are in a filamentous shape, and the corn stalk section is also smashed, soft, and does not tie hands, the cattle and sheep love to eat, and the grass is eaten clean, and the forage is reduced. waste. This machine can be used together with the knapsack corn harvester developed by our company to make corn harvesting and straw crushing and recycling complete once. It can save a lot of manpower and material resources in the recycling process of corn stalks. The stalks can be transported back to feed cattle and sheep directly, and can also be used as green storage, yellow storage, dry storage or other uses. In addition to supporting the corn harvester, it can also be used as a green machine. The corn stalks are crushed and recycled, and are directly loaded into a transport vehicle. The transported stalks can be used as green storage, yellow storage, dry storage, or direct feeding of cattle and sheep. In addition to the above two uses, it is also possible to put the cut corn mash into a shop, pick it up with a stalk crusher, and crush it for recycling. In 2004, manager Wang Jinkuan of Beijing Yanqing Yanhong Six-ring Meidi Bioengineering Technology Co., Ltd. used this straw smashing recycling machine to collect corn stalks as a yellow storage in Yanqing County and achieved very good economic benefits. They plan to build in 2005— It will take about a month after the straw smashing and recycling machine picks up the dried corn stalks in the month. The crushed straw will be pulled back into the factory and used as a dry storage feed. Our company perfected the concept of 4YD-3A corn harvester in 2005, making it more suitable for the needs of various markets in China and planning to develop a multi-purpose chassis tractor. The use of a multi-purpose chassis to produce self-propelled corn harvesters is more suitable for the corn harvesters needed for different corn planting patterns in various parts of the country. The corn stalks keep the harvested corn harvester and the corn straw is put on the ground to dry the corn harvester. In short, the needs of farmers are the direction in which we study production. We must work hard to develop and produce favorite corn harvesters for farmers. Beijing Jinle Agricultural Machinery Co., Ltd. Tel: 010-80521391 Address: (Beijing Tongzhou District) Fax: Fax: 101105 Fax: 101105 Contact: Zhao Bingjie